The ECON FP can respond to flow input from a variety of water conditioning equipment. It can accept a dry contact (non-voltage) contact signal from a water meter and will run for the operating time that is set. There are five operating time ranges that are displayed in seconds on the control pad: 1, 5, 10, 20 or 60 and are adjustable from 10% to 100%. The pump can accept a dry (non-voltage) contact from a flow switch and will run at a set speed for as long as it receives the dry contact.The Econ FP can also accept a 12-24 VAC/VDC signal from a water softener or other type of control equipment that responds to water flow. The Econ FP is available with a water meter pre-mounted to a heavy duty panel.
Shipping Weight 4 lbs (1.8 kg) Pump Dimensions 5.4 x 3.7 x 5.9 in. (13.7 x 9.4 x 15.0 cm)
FEATURES
Pump is field programmable to repsond to a flow switch dry contact, water meter dry contact or a 12-24 VAC/VDC input signal
3-Point roller design assists in anti-siphon protection
Pump head requires no valves, allows for easy maintenance
Self-priming against maximum working pressure, foot valve not required
Pump does not lose prime or vapor lock
Pumps off-gassing solutions and can run dry
Output volume is not affected by back pressure
Easy to change pump tube; lubrication is not required
All pump accessories included allow a fast and easy installation
SPECIFICATIONS
Output Control: Six button control panel with LCD display
Maximum Working Pressure: 80 psi (5.5 bar)
Maximum Operating Temperature: 104° F (40° C)
Maximum Suction Lift: 25 ft (7.6 m) vertical lift, based on water
Motor Type: 24 VDC, brushless
Approximate Shaft RPM: 60
Duty Cycle: Continuous
Motor Voltage (Amp Draw): 120V 60Hz (0.17)
Power Cord Type: STP-2W
Power Cord Plug End: Wall adapter power supply 100-120V, 60Hz 0.25 input, two prong polarized 24VDC, 1.25A, class II output